Three sections each 24 feet by 8' 2" x 6' high. Draft .400 and all are road transportable. Each section is equipped with bollards, tyre fenders and rails. These sections are joined on end with swing arms (see the long slender plate arms tied upright  on the left) which are bolted or pinned to the next section and a hinged swing down ramp which connects as a walkway between one section and the next. All sections also have telescopic arms (see the photos at left of tubular swing arms with heavy duty plate like feet on the ends) with plates on the end which can be fixed to an existing jetty or pier if required to lock the floating pier into position. In fact there is a possible 25 metres of floating pier available here. (see initial photos at left where the dock was recently in use at Melbourne Port) This unit has been taken from the water in good condition as is evidenced by the photos at left and is ready for further use. This is a very versatile piece of marine commercial equipment on offer which has been used for ferry work, loading and berthing in  Port Phillip Bay.
Available for lease or sale.
Each section is priced to sell at  $25K, $75K for all three.